To reprogram your DIRECTV remote, follow these steps:
1. Determine the Model of Your Remote
DIRECTV remotes come in different models, such as the RC73, RC72, and RC66. Check the back of your remote for the model number to ensure you follow the correct steps.
2. Turn on Your Equipment
– For a DIRECTV receiver, press the Power button to turn it on.
– If you’re programming the remote to control your TV, turn on the TV as well.
3. Enter Programming Mode
– Press and hold the Select and Mute buttons on the remote at the same time until the red indicator light at the top of the remote turns on and stays on.
– Release both buttons. The red light will blink and then remain on.
4. Program the Remote to Your DIRECTV Receiver
– For most receivers, press the 1 button (for a DIRECTV receiver) or 2 (for a TV or other device).
– The red light will blink and then remain on again.
5. Find the Correct Code
– Press and release the Play button. The remote will start searching for the correct code.
– If the remote successfully finds the code, the red light will blink and turn off.
– If it doesn’t work, try repeating the process or manually entering a code from the DIRECTV remote control code list (you can find this on the DIRECTV website or in the remote’s manual).
6. Test the Remote
After programming, test the remote by using it to control your TV or DIRECTV receiver. Try adjusting the volume, changing channels, or turning the equipment on/off to ensure it’s working properly.
If these steps don’t work, you can also use the DIRECTV app or website to find more specific troubleshooting steps.
