How to Install Kicker 200.4 Subwoofer into Your Stock Car Stereo System- A Step-by-Step Guide

How to Install Kicker 200.4 to Stock Car Stereo

Installing a Kicker 200.4 amplifier to your stock car stereo can significantly enhance your vehicle’s audio performance. This step-by-step guide will walk you through the process, ensuring a seamless and effective installation.

Step 1: Gather the Necessary Tools and Materials

Before beginning the installation, gather the following tools and materials:

– Kicker 200.4 amplifier
– Wiring harness
– Soldering iron and solder
– Heat shrink tubing
– Wire strippers
– Screwdriver
– Wire nuts
– Electrical tape
– Car stereo wiring diagram

Step 2: Disconnect the Car Stereo

Start by disconnecting the stock car stereo from the battery to prevent any electrical shocks. Locate the negative battery terminal and remove the cable to disconnect the battery.

Step 3: Identify the Amplifier Input and Output Wires

Refer to the car stereo wiring diagram to identify the amplifier input and output wires. The input wires are typically colored red and white, while the output wires are usually colored red and black.

Step 4: Connect the Amplifier Input Wires

Using the provided wiring harness, connect the amplifier input wires to the corresponding wires on the car stereo. Ensure that the wires are securely connected and wrapped with heat shrink tubing for added protection.

Step 5: Connect the Amplifier Output Wires

Connect the amplifier output wires to the speaker wires in the car. If the amplifier has a remote turn-on wire, connect it to the car’s ignition wire to ensure the amplifier turns on when the car is turned on.

Step 6: Route the Amplifier and Wiring Harness

Route the amplifier and wiring harness to a suitable location in the car. Ensure that the amplifier is securely mounted and that the wiring is not damaged or pinched.

Step 7: Connect the Amplifier to the Battery

Reconnect the battery to the car and connect the amplifier to the battery using the provided wiring harness. Ensure that the connections are secure and wrapped with heat shrink tubing.

Step 8: Test the Amplifier

Turn on the car and test the amplifier by playing music through the car stereo. Ensure that the sound quality is improved and that the amplifier is functioning correctly.

Step 9: Secure the Amplifier and Wiring Harness

Secure the amplifier and wiring harness in place using zip ties or cable ties. Ensure that the wiring is not damaged or pinched and that the amplifier is stable.

Step 10: Reconnect the Car Stereo

Reconnect the stock car stereo to the battery and test the system again to ensure everything is working correctly.

Congratulations! You have successfully installed a Kicker 200.4 amplifier to your stock car stereo. Enjoy the improved audio performance and enjoy your music on the road.