How to Successfully Replace the Nintendo Switch Lite Joystick- A Comprehensive Guide

How to Replace Switch Lite Joystick

Introducing the Nintendo Switch Lite, a portable version of the popular Nintendo Switch console. While the Switch Lite offers a great gaming experience, it’s not immune to wear and tear, especially the joystick. Over time, the joystick can become unresponsive or sticky, affecting your gameplay. If you find yourself in this situation, don’t worry; replacing the Switch Lite joystick is a relatively straightforward process. In this article, we’ll guide you through the steps to replace your Switch Lite joystick and get back to enjoying your favorite games.

Before you begin, gather the following tools and materials:

1. Replacement joystick (ensure it’s compatible with the Switch Lite)
2. Small flathead screwdriver
3. Isopropyl alcohol
4. Cotton swabs
5. Plastic spudger or a thin, flat tool
6. Soft cloth or microfiber cloth

Now, let’s dive into the steps to replace your Switch Lite joystick:

1. Power off your Switch Lite and remove the battery. This will prevent any accidental damage during the process.

2. Place your Switch Lite face down on a soft surface to prevent any scratches.

3. Using the flathead screwdriver, remove the four screws located on the back of the Switch Lite. Set the screws aside.

4. Carefully slide the back cover off the device. Be gentle to avoid damaging any internal components.

5. Locate the joystick assembly, which is connected to the top of the Switch Lite. It’s held in place by a small clip. Use the plastic spudger or thin tool to gently lift the clip and release the joystick assembly.

6. Once the clip is released, carefully pull the joystick assembly away from the Switch Lite. Be cautious as there may be some cables connected to the assembly.

7. Disconnect the cables from the joystick assembly. These cables are usually held in place with a small clip or by friction. Gently pull them apart.

8. Remove the old joystick by unscrewing the screws that hold it in place. Set the old joystick aside.

9. Take the new joystick and align it with the screw holes. Screw it into place, ensuring it’s secure.

10. Reconnect the cables to the new joystick assembly. Make sure they are firmly in place.

11. Reassemble the joystick assembly by sliding it back into the Switch Lite and reattaching the clip.

12. Reattach the back cover of the Switch Lite and secure the four screws.

13. Power on your Switch Lite and test the new joystick to ensure it’s working correctly.

14. Finally, clean the new joystick with isopropyl alcohol and a cotton swab to remove any dust or debris.

Congratulations! You’ve successfully replaced the joystick on your Switch Lite. Enjoy your improved gaming experience with the new, responsive joystick.