Step-by-Step Guide- How to Successfully Install a Petsafe In-Ground Fence System
How to Install PetSafe In-Ground Fence
Installing a PetSafe in-ground fence is a great way to keep your furry friend safe and secure in your yard. This type of fence provides a safe and effective boundary for your pet, allowing them to roam freely while preventing them from wandering off. In this article, we will guide you through the process of installing a PetSafe in-ground fence, ensuring a successful and worry-free setup for both you and your pet.
Step 1: Choose the Right PetSafe In-Ground Fence System
Before you begin the installation process, it’s essential to select the right PetSafe in-ground fence system for your pet’s size, breed, and activity level. PetSafe offers various systems, including the Basic, Select, and Ultra systems, each designed to cater to different needs. Make sure to read the product specifications and choose the system that best suits your pet.
Step 2: Prepare the Installation Area
Once you have the appropriate PetSafe in-ground fence system, it’s time to prepare the installation area. Clear the area of any debris, rocks, or other obstacles that could interfere with the fence installation. It’s also essential to mark the boundaries of your yard to ensure that the fence is installed correctly.
Step 3: Lay Out the Boundary Wire
Unroll the boundary wire along the perimeter of your yard, following the marked boundaries. Ensure that the wire is taut and tight, avoiding any sharp turns or kinks. The boundary wire should be buried approximately 2-3 inches deep to prevent your pet from digging it up.
Step 4: Install the Boundary Wire Posts
Attach the boundary wire to the posts at regular intervals, typically every 10-15 feet. Make sure the posts are securely fastened to the ground, as they will hold the wire in place. If necessary, use concrete to secure the posts firmly.
Step 5: Connect the Transmitter and Receiver Collar
Connect the transmitter to a power source, such as an outdoor outlet or a surge protector. Place the receiver collar on your pet, ensuring it is properly adjusted and snug. The collar should be worn at all times when your pet is in the yard.
Step 6: Test the System
Before allowing your pet to use the in-ground fence, it’s crucial to test the system. Activate the transmitter and observe the collar’s behavior. The collar should beep when your pet approaches the boundary wire, and the static correction should be delivered if your pet crosses the boundary. Adjust the collar’s sensitivity as needed to ensure the correct level of correction.
Step 7: Train Your Pet
Training your pet to understand the boundaries of the in-ground fence is essential. Start by allowing your pet to wear the collar in the yard while you are present. Gradually increase the distance between you and your pet, rewarding them for staying within the boundary. With time and patience, your pet will learn to respect the boundaries set by the in-ground fence.
By following these steps, you can successfully install a PetSafe in-ground fence, providing a safe and secure environment for your pet to enjoy. Remember to regularly check the system and collar to ensure proper functioning and adjust the settings as needed to keep your pet happy and safe.
