How to Reset Blink Outdoor Camera
If you’re experiencing issues with your Blink outdoor camera, such as connectivity problems or a frozen screen, resetting the device can often resolve these issues. In this article, we’ll guide you through the steps on how to reset your Blink outdoor camera to get it up and running smoothly again.
Step 1: Power Off the Camera
The first step in resetting your Blink outdoor camera is to power it off. Locate the power button on the camera, which is typically located on the back of the device. Press and hold the button for a few seconds until the camera turns off. This will ensure that the camera is completely powered down before you proceed with the reset.
Step 2: Disconnect the Camera from Power
After the camera has turned off, unplug it from the power source. This can be done by removing the camera from its mounting bracket or by unplugging the camera from the electrical outlet. Make sure that the camera is completely disconnected from power before moving on to the next step.
Step 3: Wait for a Few Minutes
Once the camera is disconnected from power, wait for a few minutes. This will give the camera enough time to discharge any residual power and ensure that all settings are cleared from its memory.
Step 4: Reconnect the Camera to Power
After waiting for a few minutes, reconnect the camera to the power source. If you were using a mounting bracket, reattach the camera to the bracket. If you were using an electrical outlet, plug the camera back into the outlet.
Step 5: Power On the Camera
Press the power button on the camera to turn it back on. The camera should now start up and begin the initialization process. This process may take a few minutes, as the camera will be reconfiguring its settings and reconnecting to your Wi-Fi network.
Step 6: Reconnect to Your Wi-Fi Network
Once the camera has finished initializing, it will prompt you to reconnect to your Wi-Fi network. Follow the on-screen instructions to enter your Wi-Fi network name and password. The camera will then attempt to connect to your network.
Step 7: Verify the Connection
After the camera has successfully connected to your Wi-Fi network, verify the connection by checking the camera’s status on the Blink app. Open the app and ensure that the camera is listed under your devices. You should also be able to view live video feed from the camera.
By following these steps, you should be able to reset your Blink outdoor camera and resolve any issues you were experiencing. If the problem persists, consider contacting Blink customer support for further assistance.
