How to Factory Reset Arlo Cameras
Factory resetting your Arlo cameras can be a useful solution when you encounter issues with your security system or simply want to start fresh. Whether you’re experiencing connectivity problems, camera malfunctions, or need to sell or give away your Arlo cameras, this guide will walk you through the process of factory resetting them. Let’s dive in and learn how to factory reset Arlo cameras step by step.
Before you begin, it’s important to note that a factory reset will erase all your camera settings, recordings, and any other data stored on the camera. Make sure to back up any important data you want to keep before proceeding.
Step 1: Power Off the Camera
Start by turning off the Arlo camera. This can be done by unplugging the camera from the power source or using the power button if available. Ensure that the camera is completely powered off before proceeding to the next step.
Step 2: Access the Reset Button
Locate the reset button on the back or bottom of your Arlo camera. It is typically a small, recessed button that requires a paperclip or a similar object to press. Insert the paperclip or similar object into the reset button and hold it down for about 10 seconds.
Step 3: Power On the Camera
While still holding the reset button, power on the camera by plugging it back into the power source or pressing the power button if available. Continue holding the reset button for an additional 10 seconds after the camera powers on.
Step 4: Release the Reset Button
After 20 seconds have passed, release the reset button. The camera will now start the factory reset process. This process may take a few minutes, so please be patient.
Step 5: Reconnect the Camera to Your Network
Once the factory reset is complete, you will need to reconnect the camera to your Wi-Fi network. Follow these steps to do so:
- Open the Arlo app on your smartphone or tablet.
- Tap the “+” icon to add a new camera.
- Follow the on-screen instructions to connect the camera to your Wi-Fi network.
- Complete the setup process by naming your camera and adjusting any settings as needed.
That’s it! You have successfully factory reset your Arlo camera and reconnected it to your Wi-Fi network. Remember to check the camera’s settings and ensure it is functioning properly after the reset.
By following these steps, you can easily factory reset your Arlo cameras whenever needed. Whether you’re troubleshooting an issue or preparing to sell or give away your cameras, this guide will help you get the job done efficiently.
