Step-by-Step Guide to Resetting Your AIWIT Doorbell Camera for Optimal Performance

How to Reset AIWIT Doorbell Camera

Are you facing issues with your AIWIT doorbell camera? Whether it’s a connectivity problem, a software glitch, or you simply want to start fresh, resetting your doorbell camera is a straightforward process. In this article, we’ll guide you through the steps to reset your AIWIT doorbell camera, ensuring that it’s up and running smoothly in no time.

Step 1: Locate the Reset Button

The first step in resetting your AIWIT doorbell camera is to locate the reset button. This button is typically found on the back or side of the camera. It may be labeled “Reset” or simply have a small button with a triangle or a dot inside it.

Step 2: Prepare for the Reset

Before you proceed with the reset, make sure you have the following:

– A paperclip or a small, flathead screwdriver to press the reset button.
– A stable internet connection, as you may need to reconnect your doorbell to the Wi-Fi network after the reset.

Step 3: Reset the AIWIT Doorbell Camera

1. With the paperclip or screwdriver, press and hold the reset button for about 10 seconds. You should see the camera’s indicator lights start to blink or turn off and on during this time.
2. Once the indicator lights stop blinking or turn off, release the reset button. The camera should now be in the reset mode.
3. Wait for a few minutes for the camera to complete the reset process. During this time, the camera may power off and on again.

Step 4: Reconnect the AIWIT Doorbell Camera to Wi-Fi

After the reset process is complete, you’ll need to reconnect your AIWIT doorbell camera to your Wi-Fi network. Here’s how to do it:

1. Open the AIWIT app on your smartphone or tablet.
2. Tap the “Add Device” button to start the setup process.
3. Follow the on-screen instructions to connect your camera to your Wi-Fi network. You may need to enter your Wi-Fi password and select the correct network.
4. Once the camera is connected to the Wi-Fi network, the app should guide you through the remaining setup steps, such as naming your camera and configuring other settings.

Step 5: Verify the Connection

After the setup process is complete, verify that your AIWIT doorbell camera is connected to the Wi-Fi network and functioning properly. You can do this by checking the camera’s live feed in the AIWIT app or by testing the doorbell’s functionality, such as pressing the doorbell button or using the two-way audio feature.

By following these steps, you should be able to reset your AIWIT doorbell camera and get it up and running smoothly again. If you encounter any issues during the process, consult the AIWIT user manual or contact AIWIT customer support for further assistance.