How to Install Wax Ring Toilet
Installing a wax ring toilet is a task that most homeowners can easily accomplish with a few basic tools and a bit of patience. This guide will walk you through the process step by step, ensuring that your toilet is securely installed and leak-free.
Materials Needed:
Before you begin, gather the following materials:
– Wax ring toilet
– New toilet bolts and washers
– Adjustable wrench
– Screwdriver
– Pliers
– plumber’s putty
– Caulk gun (optional)
Step 1: Remove the Old Toilet
1. Turn off the water supply to the toilet by turning the valve located behind the toilet.
2. Flush the toilet to drain any remaining water in the tank.
3. Remove the tank lid and disconnect the water supply line from the tank.
4. Remove the bolts holding the tank to the bowl and carefully lift the tank off the bowl.
5. Disconnect the toilet from the waste pipe and remove the old toilet from the floor.
Step 2: Clean the Area
1. Clean the area where the toilet will be installed to ensure a smooth, leak-free seal.
2. Apply plumber’s putty around the bottom of the toilet bowl where it will come into contact with the floor.
Step 3: Install the Wax Ring
1. Place the wax ring on the bottom of the toilet bowl, making sure it is centered.
2. Gently push the toilet bowl down onto the wax ring, ensuring that it is seated properly.
Step 4: Attach the Toilet to the Floor
1. Position the toilet bowl on the floor and line up the bolt holes with the floor flange.
2. Insert the toilet bolts through the bolt holes and into the floor flange.
3. Thread on the washers and tighten the bolts slightly to hold the toilet in place.
Step 5: Attach the Tank
1. Place the tank on the bowl and line up the bolt holes.
2. Insert the bolts through the bolt holes and into the tank.
3. Thread on the washers and tighten the bolts securely, but do not overtighten.
Step 6: Connect the Water Supply and Test for Leaks
1. Reconnect the water supply line to the tank.
2. Turn on the water supply and check for leaks around the base of the toilet and at the connections.
3. If there are no leaks, the installation is complete.
Conclusion:
Installing a wax ring toilet is a straightforward process that can save you money and provide a leak-free toilet. By following these steps and using the right tools, you can ensure a successful installation. If you encounter any difficulties, don’t hesitate to consult a professional plumber for assistance.
