Step-by-Step Guide to Installing Peerless Snow Chains for Safe Winter Driving

How to Install Peerless Snow Chains

Installing Peerless snow chains is a crucial step to ensure safe and reliable driving during winter conditions. These chains are designed to provide additional traction on snowy and icy roads, reducing the risk of skidding and accidents. In this article, we will guide you through the process of installing Peerless snow chains step by step, ensuring that you can get back on the road with confidence.

Step 1: Preparation

Before you start installing the Peerless snow chains, it is essential to prepare your vehicle. First, ensure that your vehicle is parked on a flat and even surface. Engage the parking brake to prevent the vehicle from rolling. Also, it is advisable to remove any mud flaps or spare tire covers that may interfere with the installation process.

Step 2: Positioning the Chains

Identify the correct position for the snow chains on your vehicle. Typically, they are installed on the drive wheels, which are the front wheels for front-wheel-drive vehicles and the rear wheels for rear-wheel-drive vehicles. For four-wheel-drive vehicles, install the chains on all four wheels.

Step 3: Attaching the Chain to the Wheel

Begin by attaching the chain to the wheel. Locate the chain tensioner, which is usually a metal clip or bracket, and attach it to the wheel lug nuts. Ensure that the tensioner is securely fastened to the wheel.

Step 4: Connecting the Chain to the Vehicle

Next, connect the chain to the vehicle. For most Peerless snow chains, you will need to attach the chain to the wheel lug nuts using a locking pin or a clip. Make sure the chain is properly aligned and securely fastened to the vehicle.

Step 5: Adjusting the Chain Tension

Once the chain is attached to the vehicle, it is essential to adjust the tension. The chain should be tight enough to provide traction but not so tight that it damages the wheel or the chain. Most Peerless snow chains come with a tensioning tool to help you achieve the correct tension. Use the tool to adjust the chain until it is tight enough.

Step 6: Checking the Installation

After adjusting the chain tension, take a moment to check the installation. Ensure that the chain is properly aligned and that there are no loose or dangling parts. If you notice any issues, re-adjust the chain tension or reposition the chain as needed.

Step 7: Removing the Chains

When the winter season is over or when you no longer need the snow chains, it is important to remove them properly. Start by loosening the tensioner and then disconnecting the chain from the vehicle. Once the chain is detached, store it in a safe and dry place for future use.

In conclusion, installing Peerless snow chains is a straightforward process that can help you navigate winter roads with confidence. By following these simple steps, you can ensure that your vehicle is equipped to handle snowy and icy conditions. Always remember to check the chain tension and alignment, and store the chains properly when not in use. Safe travels!